Chart with three boxes showing different word rules by speed for billboard ads

OOH Education / Billboard design

How Many Words Should a Billboard Have?

Search for the answer and you will find 5 words, 7, 8, or 9. Each number has a different origin, and some have none at all. Here is where each one comes from, and how to work out the right limit for your board’s speed.

By Dan Resnikoff, Principal Billboard Strategist, Ad Corrector®
Published: · Updated:

Disclosure: I created Ad Corrector. The word limits by speed in this article are my own arithmetic, using Ad Corrector’s reading-time reference, which is not from a published study and has not been field validated. The road-sign research cited here was done on traffic and message signs, not advertising billboards, so treat every figure as a planning starting point.

Short answer: for a highway billboard, keep the main message to about 7 words or fewer. At 70 mph and above, plan on 6 or fewer. On slower roads the math allows more, but a short message is still the safer choice. Treat the number as a ceiling, not a target: fewer words read faster.

Where each number comes from

The word-count rules you will find are not competing measurements of the same thing. Some come from operators’ design advice, one comes from federal research on electronic road signs, and some have no traceable source. Knowing which is which tells you how much weight to give each one.

Common word-count rules and where they come from
RuleWhere it comes fromWhat it is based on
7 words or fewerThe most common guidance, repeated by major billboard operators such as Lamar and Clear Channel OutdoorLamar ties it to an exposure time of typically four to five seconds for a moving audience
8, 7, or 6 wordsFederal guidance on changeable message signs, as summarized by the U.S. Department of TransportationA message that must be read in about 8 seconds or less, at about one word per second: 8 words at 55 mph, 7 at 65 mph, and 6 at 70 mph
9 words or fewerA Lamar billboard design guide hosted by the Oregon Department of TransportationAdvice to move detailed descriptions and product lists to websites and brochures instead
5 words or fewerSome highway design adviceUsually no stated basis. It works as a cautious choice for high-speed roads

The federal figures are the only ones tied to a stated reading rate and speed. They come from research on electronic road signs, where drivers look for specific information, so they describe what is plausible to read, not what a driver will choose to read on an advertisement. Still, they land close to the industry’s 7-word habit at highway speed.

About the “7 words improves recall” study

You may see the 7-word rule credited to a 1985 experiment by Blasko, reported to show that billboards with 7 or fewer words had higher brand recall. It is widely repeated, including in teaching materials on advertising principles, but we could not locate the original study to confirm its method or results. Treat it as an often-cited claim, not verified evidence.

How many words fit at your speed

A word limit only means something at a given speed and distance. The method from How Long Does a Driver Have to Read a Billboard? turns those into a word budget: find the time in view, keep a margin, and spend the rest on words.

The table below assumes the message first becomes readable at 600 feet, which takes capital letters about 20 inches tall at 1 inch per 30 feet. It keeps 2 seconds in reserve for glances back to the road, then applies Ad Corrector’s reading-time reference of 0.31 seconds per familiar word plus 1.94 seconds.

Approximate maximum words, readable from 600 feet
SpeedTime in viewAfter a 2-second marginMaximum words
35 mph11.7 s9.7 s24
45 mph9.1 s7.1 s16
55 mph7.4 s5.4 s11
65 mph6.3 s4.3 s7
70 mph5.8 s3.8 s6

At 65 and 70 mph the arithmetic lands on 7 and 6 words, matching the federal figures. At slower speeds it allows more, because the board stays in view longer. These are ceilings under ideal conditions. A curve, traffic, a smaller letter, or weak contrast all shrink them, and a message near the ceiling leaves no room for error.

Two levers change the result. Larger letters start the clock earlier, which buys time. Fewer words spend less of it. See what letter height a billboard needs for the first lever.

What counts as a word

Count every word a viewer has to read to get the message:

  • The headline and any supporting line.
  • The brand or business name, when it is set as text rather than a familiar logo.
  • The call to action, including a web address or phone number.

The reading-time research counts familiar words. A phone number or an unusual web address is not a familiar word, so expect it to take longer to read than one ordinary word. If the call to action is a long string, it can use most of the budget on its own.

Fewer words is not the whole answer

A 5-word board can still fail if the type is thin, the contrast is weak, or the layout makes the eye hunt for the message. Word count measures one part of the load a board puts on a viewer. Why Saying More on a Billboard Usually Backfires covers the rest: how many separate ideas the board asks the viewer to process, and how to decide what earns a place.

How Ad Corrector checks it

Ad Corrector’s Copy Length score compares the word count of your confirmed copy with guidance for the board format you choose. The Reading Time Reference estimates how long your copy takes to read and compares it with the time in view at your speed and distance, so you can see whether the message fits. The reading-time figure is a reference only and does not change the grade.

Use the Scenario Simulator to re-run the same artwork at another speed and see how the margin changes.

Where this guidance stops

The federal figures and the reading-time reference come from road-sign research, not studies of advertising billboards. The operator guidance is experience-based advice without published methods. None of these figures measures whether a message is remembered or acted on. Use them to set a ceiling, then confirm the finished design at its real viewing distance and speed. For the gap between reading and understanding, see Why Billboard Visibility Doesn’t Equal Understanding.

Reader questions about billboard word count

How many words should a billboard have?

For a highway billboard, about 7 words or fewer for the main message, and 6 or fewer at 70 mph and above. Slower roads allow more, but a short message is still the safer choice. Treat the number as a ceiling, not a target.

Where does the 7-word rule come from?

It is the most common guidance from billboard operators, who tie it to the few seconds a moving audience has. Federal guidance on electronic road signs reaches a similar figure: 7 words at 65 mph, at about one word per second.

How many words can a billboard have at 70 mph?

About 6. Federal message-sign guidance gives 6 words at 70 mph, and Ad Corrector’s reading-time arithmetic also gives about 6 for a board readable from 600 feet with a 2-second margin.

Can a billboard on a slower road have more words?

Yes. At 35 mph a board readable from 600 feet is in view for about 11.7 seconds, nearly twice as long as at 65 mph, so the arithmetic allows considerably more words. A short message still reads faster and leaves room for error.

Does a web address or phone number count as words?

Yes. Count everything a viewer has to read. A phone number or unusual web address takes longer to read than an ordinary word, so it can use a large share of the word budget.

Is there research proving 7 words improves recall?

A 1985 experiment by Blasko is often cited for this, but we could not locate the original study to confirm its method or results. The stronger evidence for short copy is the reading-time and road-sign research, which ties word count to speed.

Does Ad Corrector check word count?

Yes. The Copy Length score compares your confirmed copy with guidance for your board format, and the Reading Time Reference compares estimated reading time with time in view at your speed and distance. The reading-time figure does not change the grade.

Sources and notes

Research and guidance: U.S. DOT, Changeable Message Sign Operation and Messaging Handbook lessons learned; National Academies, Human Factors Guidelines for Road Systems, changeable message signs.

Industry guidance: Lamar Advertising, design tips; Clear Channel Outdoor, creative principles; Lamar Advertising, Billboard Design Tips (Oregon DOT).

Secondhand claim: the Blasko (1985) recall finding, as reported in advertising principles teaching slides. The original study could not be verified.

Calculations: time in view is distance divided by speed, with 1 mph taken as 1.467 feet per second. Maximum words subtract a 2-second margin, then apply Ad Corrector’s reference of 0.31 seconds per familiar word plus 1.94 seconds, rounded down. Letter-height distances use 30 feet per inch.

Ad Corrector references: Scientific Foundations and methodology.